Multi-purpose Full-frequency Pipeline Detector Pipe and Cable Location Dectector FLX-SL580B

 

 

FLX-SL580B multi-purpose full-frequency pipeline detector is the ideal equipment specially detecting various kinds of pipelines for oil (gas) transportation, water supply, drainage, gas, heat, and industry, etc. and various cables for electricity and telecommunication, etc. used by such underground pipeline design organizations as professional pipeline detection, pipeline management and maintenance, municipal administration planning and construction , power supply, building and construction. It’s also the optimum replacement for traditional underground pipeline detectors.
【Characteristics】
1. DSP processor used to provide a fast calculation speed and a high accuracy;
2. The orientation function to indicate the pipeline running direction, making location faster;
3. Adoption of the 10W broadband transmitter, applicable to various environments;
4. With the Lithium battery supplying power for both the receiver and the transmitter, being environmentally friendly;
5. The display is backlighted, applicable to night emergency rescue;
6. Indication with left and right arrows, able to rapidly locate the pipeline;
7. Front and back arrows and dB values to indicate the location of the damaged points on coatings during detection of the damaged points on coatings.
【Working Principles】
Pipeline location and depth investigation principle:
 multi-purpose full-frequency pipeline detector detects underground pipelines electromagnetically, which applies signals to metal pipelines through the transmitter, generates pipeline current in metal pipelines and secondary magnetic field around pipelines, and measures the secondary magnetic field of pipelines on ground through the receiver, in order to accurately determine the location, buried depth, running direction, route, and signal current intensity of pipelines.
Leakage testing on anti-corrosive coatings principles
 An electrical signal is sent to the underground metal pipeline through the transmitter. In case damaged points exist on the underground pipeline coating, they are short-circuited with the earth, generating creepage current radiating all around, with the most intensive radiation above the damaged points. Based on that, the damaged points on coatings are found.
【Technical Parameters】
Transmitter:
Function: to apply the location signal of a certain frequency onto the pipeline
Output modes: induction, direct link, clamping
Various frequencies: 128Hz, 512Hz, 1KHz, 2KHz, 8KHz, 33KHz, 65KHz, 83KHz
Frequency configuration at various modes:
Induction mode:  65KHz, 83KHz
Direct link mode: 128Hz, 512Hz, 1KHz, 2KHz, 8KHz, 33KHz, 65KHz, 83KHz
Clamping mode:  33KHz
Maximum power output: 10W
Maximum voltage output: 60V
Maximum current output: 1A
Power supply: dual power, Lithium battery pack (energy-efficient and environmental-friendly)
Continuous working time:
1W            12 hours
5W            8 hours
10W            5 hours
Weight: 2.6kg
Ambient temperature: -20℃-50℃
Receiver:
Purpose: location of underground pipelines and cables (able to determine position, running direction, depth, and current of underground pipelines)
Location modes:
Peak mode: two horizontal coils are used
Broad peak mode: one horizontal coil is used
Valley mode: one vertical coil is used, having the function of left and right orientation
Receive frequency: 50Hz, 100Hz, radio, 128Hz, 512Hz, 1KHz, 2KHz, 8KHz, 33KHz, 65KHz, and 83KHz
Gain control: automatic gain, range of 0-100dB
Location accuracy: 5% of depth (range of depth 0-3m)
               10% of depth (range of depth >3m)
Measurement accuracy of currents: ≤5% of actual current
Measuring range: 0-6m
Power supply: Lithium battery pack (energy-efficient and environmental-friendly)
Working time: an average of 8 hours
Weight: 1.8kg
Ambient temperature: -20℃-50℃
【Standard Configuration】
10W broadband large-power transmitter, full-frequency receiver, A-type bracket, clamp, direct link line, earthing bar, transmitter charger, receiver charger, packing box, and user’s  manual.

FLX-SL580B multi-purpose full-frequency pipeline detector is the ideal equipment specially detecting various kinds of pipelines for oil (gas) transportation, water supply, drainage, gas, heat, and industry, etc. and various cables for electricity and telecommunication, etc. used by such underground pipeline design organizations as professional pipeline detection, pipeline management and maintenance, municipal administration planning and construction , power supply, building and construction. It’s also the optimum replacement for traditional underground pipeline detectors.


【Characteristics】

1. DSP processor used to provide a fast calculation speed and a high accuracy;

2. The orientation function to indicate the pipeline running direction, making location faster;

3. Adoption of the 10W broadband transmitter, applicable to various environments;

4. With the Lithium battery supplying power for both the receiver and the transmitter, being environmentally friendly;

5. The display is backlighted, applicable to night emergency rescue;

6. Indication with left and right arrows, able to rapidly locate the pipeline;

7. Front and back arrows and dB values to indicate the location of the damaged points on coatings during detection of the damaged points on coatings.


【Working Principles】

Pipeline location and depth investigation principle:

multi-purpose full-frequency pipeline detector detects underground pipelines electromagnetically, which applies signals to metal pipelines through the transmitter, generates pipeline current in metal pipelines and secondary magnetic field around pipelines, and measures the secondary magnetic field of pipelines on ground through the receiver, in order to accurately determine the location, buried depth, running direction, route, and signal current intensity of pipelines.

Leakage testing on anti-corrosive coatings principles

An electrical signal is sent to the underground metal pipeline through the transmitter. In case damaged points exist on the underground pipeline coating, they are short-circuited with the earth, generating creepage current radiating all around, with the most intensive radiation above the damaged points. Based on that, the damaged points on coatings are found.


【Technical Parameters】

Transmitter:

Function: to apply the location signal of a certain frequency onto the pipeline

Output modes: induction, direct link, clamping

Various frequencies: 128Hz, 512Hz, 1KHz, 2KHz, 8KHz, 33KHz, 65KHz, 83KHz

Frequency configuration at various modes:

Induction mode:  65KHz, 83KHz

Direct link mode: 128Hz, 512Hz, 1KHz, 2KHz, 8KHz, 33KHz, 65KHz, 83KHz

Clamping mode:  33KHz

Maximum power output: 10W

Maximum voltage output: 60V

Maximum current output: 1A

Power supply: dual power, Lithium battery pack (energy-efficient and environmental-friendly)

Continuous working time:

1W            12 hours

5W            8 hours

10W            5 hours

Weight: 2.6kg

Ambient temperature: -20℃-50℃

Receiver:

Purpose: location of underground pipelines and cables (able to determine position, running direction, depth, and current of underground pipelines)

Location modes:

Peak mode: two horizontal coils are used

Broad peak mode: one horizontal coil is used

Valley mode: one vertical coil is used, having the function of left and right orientation

Receive frequency: 50Hz, 100Hz, radio, 128Hz, 512Hz, 1KHz, 2KHz, 8KHz, 33KHz, 65KHz, and 83KHz

Gain control: automatic gain, range of 0-100dB

Location accuracy: 5% of depth (range of depth 0-3m)

               10% of depth (range of depth >3m)

Measurement accuracy of currents: ≤5% of actual current

Measuring range: 0-6m

Power supply: Lithium battery pack (energy-efficient and environmental-friendly)

Working time: an average of 8 hours

Weight: 1.8kg

Ambient temperature: -20℃-50℃


【Standard Configuration】

10W broadband large-power transmitter, full-frequency receiver, A-type bracket, clamp, direct link line, earthing bar, transmitter charger, receiver charger, packing box, and user’s  manual.

 


 

  • Related Products